Past Projects
    Coming Soon
The Pony 500
The Pony 500 Rotary Screw Compressor

If you're looking for a mid-size affordable compressor, the "

PONY 500

" will fit your needs. This skid mounted compressor system is powered by the legendary Cummins "B" Series engine and coupled with the BOSS Rotary Screw Gas Compressor. The unit is lightweight and portable, requiring no special site preperation. The system needs no special connections or trucking requirements, allowing for quick hook-ups.
  • Capacities from 150 to 500 MCF/D
  • Suction down to 20Hg;
  • Discharge up to 220 PSI
  • Cummins "B" Series 84hp engine
  • Also available w/ electric drive
  • Boss SCG14 Rotary Screw Compressor
  • 10" Inlet Scrubber w/ Filter
  • Oil Cooler / Gas Aftercooler
  • Powder Coated Skid & Components
  • All Stainless Steel Hoses
  • Control Panel w/ Tachometer & Hour Meter
  • 6’ 6" X 10&rsquo' Skid w/ Pollution Rail
  • Murphy ST8 Annunciator Panel
  • Automatic Engine Oil Makeuup System w/ 5 ga. Tank
  • On Board or Off Skid Fuel Gas System w/ 1" NPT Conn.
  • Package Complete: Connection Suction, Connect Discharge, Put In Service

The BGB Series from BOSS
BGB Gas Rotary Screw Series

For an efficient and economic production tool that utilizes a separate engine and rotary screw booster, turn to the BGB Gas Booster System from BOSS Industries.

Small, lightweight, portable packages designed for unattended operation, that can easily be transported and installed from wellhead to wellhead with no site preparation.

Gas production volumes up to 425 MSCFD and discharge pressures up to 220 PSIG.
Standard Equipment
  • Separate Engine / Compressor
  • Two-Stage Engine Air Filter
  • ASME Compressor Gas/Oil Separation Receiver Tank
  • Electronic Governer
  • Inlet Gas Scrubber with High Liquid Level Shutdown
  • Manual By-Pass Valve
  • 5.5 Gallon Engine Oil Make-Up System
  • Adjustable Height Hitch
  • 12 Volt DC, Heavy Duty Maintenance Free Battery with Remote Battery Jumper Posts
  • Trailer Light Package
  • All Vessels Protected by Pressure Relief Valves
  • Gas After Cooler (10°F Approach)
  • Engine Radiator
  • 1 Year Limited Warranty
  • Compressor Oil Cooler
  • Control and Digital Instrumention
    • Variable Speed Electronic Governer (1,400 - 2,400 RPM)
    • Control Panel Housed in a 24x24x9 Nema 4 Weatherproof Enclosure with Non-Locking T-Handle latches
    • Rotary Start Switch for Hand - Off - Auto
    • Digital gauge Panel Consisting of: Tachometer, Engine Coolant Temperature, Ammeter, Hour Meter, Suction Pressure and Discharge Pressure
    • Automatic Start/Stop off of Suction Pressure
    • Automatic Engine/Compressor Speed Control off of Suction Pressure
  • Safety Systems/Shutdowns with Annunciator Panel
    • Inlet Gas Scrubber - High Liquid Level Shutdown
    • High Engine Coolant Temperature Shutdown
    • High Compressor Oil Temperature Shutdown
    • Low Inlet Gas Pressure Shutdown
    • Exterior Emergency Shutdown Button
    • Engine Overspeed / Underspeed Shutdown
    • Low Engine Oil Level Shutdown
Available Options
  • ASME Blowcase Scrubber Tank
  • Trailer Brakes
  • Shutdown Indicators
  • Special Paint
  • Low Engine Coolant Shutdown
  • Automatic Liquid Level Drain on Inlet Scrubber
  • Automatic By-Pass Valve
  • Oil Field Skid Mounted
  • High-Pressure Models Available, up to 220 PSIG
Production VolumesUp to 300 MSCFDUp to 425 MSCFD
Suction Pressure0 to 10 PSIG0 to 10 PSIG
Discharge PressureUp to 150 PSIGUp to 220 PSIG
Gas End Warranty1 Year Limited1 Year Limited
Engine ModelGM Vortec 3.0LGM Vortec 4.3L
Engine HP42 Continuous63 Continuous
Engine Idle RPM14001400
Engine Full Load RPM24002400